Pyrodrone F4 OSD V2-AK32 Stack Combo

Regular price $0.00 $92.99 Sale

Availability: Available Unavailable

Product SKU: 6B-5614

Version 2.2 Update:Attention! you have to update your FW 3.5.5 or up for the VTX pit mode.The Pyrodrone F4 OSD has a new feature!VTX Pit mode compatibilty.Now there are sellector pads for your VTX voltage input!5V and VBAT.First please jump...

Product Details

Version 2.2 Update:
Attention! you have to update your FW 3.5.5 or up for the VTX pit mode.
The Pyrodrone F4 OSD has a new feature!
VTX Pit mode compatibilty.

Now there are sellector pads for your VTX voltage input!
5V and VBAT.
First please jump the correct side pads according to the VTX you are using. 

And then jump the two pads on the "PIT" side ( If this feature is not needed then just jump the pads of the "ON" side and your VTX will always be on)
After you jump the PIT pads connect to Betaflight and go to CLI page , type in the following commands:

resource PINIO 1 A15
set pinio_box = 39,0,0,0
type "save" and then hit enter.

Wait for the FC to reboot, then go to the "MODES" tab in Betaflight and set VTX PIT MODE to an AUX channel you prefer

Done! :-)

This is what you get when you combine the best of both worlds.
We have received the same question from multiple customers, I will be getting the Pyrodrone F4 OSD, what 4in1 do you guys recommend?
Our team pilots @Headsupfpv, @RRUREADY ,@Zeppler and @DolmaFPV been running this stack since the release of our F4 OSD and they couldn't be happier.

Package includes:
1 x Pyrodrone F4 OSD
1 x FC>4in1 connecting wire harness
5 x Mounting Grommets
1 x Aikon AK32 ESC
1 x 35V 330uF Capacitor
1 x Wire Harness 


F4 OSD Specs:
HyperLite F4 OSD
One of the most popular FC s is back and better than ever, combining an industry favorite layout with new feature sets for freestyle, long range, and racers. Finally, a board for every pilot!  
The new Hyperlite F4 OSD takes the same celebrated flat-bottomed layout (crucial for clean and tight builds) and adds a much appreciated OSD and SIX UART ports (more than any other board on the market!) for GPS, RX, SmartAudio, and even Camera Control.  
And with more features, comes improved ease of use with a built in 4-in-1 ESC socket and included harnesses for HobbyWing, Airbot, and Spedix 4in1 ESCs. The built in solder pads mirror the 4in1 pad layout, so you can easily connect ANY ESC to this board to get features like current sensing and ESC telemetry (for the BL32 guys). 
PLEASE NOTE: The Hyperlite F4 OSD uses it s own BF target .bin, PYRODRONEF4 . 
Tech Specifications:
MPU6000 Gyro
STM32F405 CPUE @ 168mhz, can be overclocked
2-6S direct battery input 
3.3V 100ma, 5V 1.2A BEC
5V Camera Power
Built in configurable Betaflight OSD
Flat bottom PCB for SUPER CLEAN builds
36x36 PCB with 30.5x30.5 mounting holes
          UART2 (FREE),
                  UART3 (INVERTED TELEMETRY),
                  UART4 (Free),
                  UART5 (Smart Audio)
                  UART4 (Free)
Built in 4 IN 1 ESC socket(including ESC telemetry, External current sensor)
Plug and plug with the most popular 4-in-1 ESCs (HobbyWing, Airbot, Spedix, Aikon),with supplied cables
Built in solder pads mirror of the 4-in-1 ESC socket
Printed layout instructions ON the board - no need for instructions!
Aikon AK32 4in1 35amp ESC Specs

BL32 is the latest in ESC technology, allowing for smoother motor output and precise throttle resolution. The AK32 combines the newest innovations with proven a proven 4-in-1 ESC form factor and reliability that AIKON is known for. 

This board pairs perfectly with the new Hyperlite F4 OSD board and other compatible boards: just solder on motor wires and plug in the harness. 



- Imported high-quality MOSFET up to 40V 

- High stability at 6S LIPO input 

- Standalone reliable regulator with 5V/2A capability 

- Default with current sensor to monitor the current output 

- Telemetry 



CPU: STM32F051 micro processor with latest BLHELI32 firmware 

Voltage: 2-6S input 

Amperage: Constant current output : 35A, 45A burst in 10s 

BEC: 5V/2A 

Size: 37mmx45mmx6mm 

Weight: 14.3g 


I have Pyrodrone F4OSD+Aikon stack combo but i can't get AMP and mAh reading on my OSD?

Please make sure to go to the Power and Battery tab in Betaflight and choose "onboard ADC" option from the second drop down menu.
After doing that you will see a third window on the bottom of your screen "Amperage meter"
Change the scale value to 250, that will give you an accurate reading of your AMP draw and mAh Count within 3 to 5% accuracy as every build is slightly different.



Your cart