The Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack is a powerful combination that features a high-precision gyroscope and F7 processor for a stable flight experience. The 32bit ESC ensures an agile and smooth transition from acceleration to deceleration. Its 30x30mm mounting size makes it suitable for many drone builds and projects.

Check out all our Stacks and the rest of our Skystars Products!

Flight Controller Specifications:

MCU: STM32F722RGT6 216MHz
Gyroscope: BMI270
Baro:Bmp280
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
VTX 10V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.

Power:

Input voltage: 3-6S
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.250mA

Flight Controller Firmware:

BetaFlight firmware: SKYSTARSF722Pro
INAV firmware:SKYSTARSF722HD

Mounting:

Installation size: 30.5mm ¡Á 30.5mm The installation hole is M4 and supports shock column installation
External size 39mm ¡Á 39mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.

AM60A 4IN1 3-6S ESC AM-32 DShot1200 600 4-in-1 ESC:

Support Dshot1200, Dshot600, PWM control signal
Input voltage: 3-6S LiPo
Con.Current: 60A
Peak Current: 80A¡Ý 10S
Firmware: AM_32
Support : Dshot 600/1200
Mounting hole : 30.5mm/M3
BEC: No
Product size: 41*46*7.6mm
Weight: 18g

1. Excellent over-current capability.
By adopt the best PCB material and PCB production process. Such as application of high TG materials , 3oz copper PCB & 2¦Ìm gold deposition process on PCB. Together with 6-layer layout design of board,compared with others common 4 layer,It can withstand bigger current.

2. Extreme stably support 6S LiPo battery
By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & imported from USA or Japan electronic materials. Plus advanced lead-free SMT Processing technology.It make ESC can fully support 6s battery and get a better performance.

3. Excellent heat dissipation performance
The CNC hollow aluminum alloy shell use, Not only good for heat dissipation, but also get a beautiful appearance.

4. Better control performance
Flashed with the latest AM_32 firmware in factory, support telemetry functions (including voltage ,RPMS & current )

Package Includes:

1x F7HD Pro3 FC
1x AM60 AM_32 4IN1 ESC
8x Silicon grommets M4 to M3
2x JST-SH1.0_8pin cable, 4cm
1x JST-GH-6P cable for DJI port, 10cm

Skystars F7HD Pro3 Flight Controller and AM60A AM-32 32bit 4-in-1 ESC Fly Tower Stack - 30x30mm