Having one of the most successful FPV companies link up with the global drone market leader, combining caddx Vista Digital HD System with our highest standards racing, freestyle and cinematic drones to create a HD pilot experience!

This frame offers a squashed X layout for maximum control, equipped SucceX-D F7(50A 4-in-1 ESC) stack and popular XING motors. Everything you just need to bind and fly!

Check out all our Digital BNF/PNP/RTFs and the rest of our iFlight Products!

Main Changelog V2.1:

LED illuminated Logo
Bottom carbon thickness increased from 2mm to 2.5mm
Arm thickness increased from 5mm to 5.5mm
The Wheelbase increased from 215mm to 217mm
TPU parts are not compatible, colour is different

Features:

Everything you need to bind and fly!
Optimized weight distribution: DJI unit and Stack cantered
Equipped with SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) Stack
Equipped with the Caddx Air Unit Polar Digital HD System -Bind and Fly
Buttery-smooth 720p 120fps FPV feed
Pre-tuned with smooth freestyle settings
Full 3K Carbon Fiber airframe with chamfered arms
Equipped with XING 2207 motors
Weight: 445.4g without battery and GoPro mount
LED illuminated Logo

Pre-Tune and Pre-Setup:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on"Firmware/Factory Dumps"
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on"How to disable Angle-Mode, activate Acro-Mode"

Specifications:

Total Dimensions: 166*139mm (body dimension)
Frame Wheelbase: 217mm
Bottom to top distance: 28mm
Arm thickness: 5.5mm
Bottom plate thickness: 2.5mm
Top plate thickness: 2mm
Upper(middle) plate thickness: 3mm
Camera plate thickness: 2.5mm (included TPU inserts)
SucceX-D F7 TwinG V2.1 FC
SucceX 50A 2-6s BLHeli32 4-in-1 ESC Dshot1200
XING 2207 1800KV (6S)
Nazgul 5140 propellers
Weight: 445.4g (without battery and GoPro mount)
Receiver : FrSky RXSR ACCST 2.4GHz (Compatible with FrSky Transmitters, Radiomaster or Any Transmitter with Multimodule/CC2500 built-in or external Modules with "FrSky D16" Mode)

FC// SucceX-D F7 V2.1 TwinG

MCU: 216MHz STM32F722
Gyro：2x ICM20689
Baro: YES
Blackbox：32MB
Betaflight OSD: YES
BEC: 5V 2.5A / 9V 2.5A
Current sensor scale: 100
Inverter for SBUS input (UART2-RX)
Smartaudio & Tramp VTX protocol supported
Beeper pad : Yes
RSSI input pad: No
UARTs：5
Motor outputs: 8
8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry：RX5
Input voltage：recommended 2-6S, MAX 8S
Firmware Target: IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 36*36mm
Weight: 7.5g
USB type-C

ESC // SucceX 50A 2-6S BLHeli32 4-in-1 ESC

Dimension: 43*39mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight:14.4g
Volts input: 2-6S
STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
Current sensor: Yes
Telemetry：Supported
BEC: No
Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
Target: iFlight-BL32-4IN1
BLHeliSuite 32 download : http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

Package Includes:

1 x Cidora SL5 V2.1 4S 6S FPV Drone – BNF
1 x Caddx Air Unit Polar Digital HD System
1 x Albatross LHCP RP-SMA 5.8g antenna
2 sets x Nazgul 5140 propellers (Set of 4 – Color may vary)
1 x 20*250mm battery strap (Color May Vary)
1 x 20*200mm battery strap (Color May Vary)
1 x GoPro TPU bottom stand incl. lock screw

iFlight Cidora SL5 V2.1 HD 6S FPV Drone BNF with Caddx Polar Digital HD System - FrSky RXSR ACCST 2.4GHz