The CineLog35 Performance version is now released in three versions: VISTA Nebula PRO,AVATAR HD 1080P and Analog version. There are also 4 receiver options.

The CineLog35 Performance version is optimized and upgraded based on the standard version. The CineLog35 is designed with lighter weight and longer endurance. The concept of the Performance version is to maximize Racing performance and achieve perfection with the existing frame size.

We upgraded the power system, using F722-45A AIO with the new SPEEDX2 2105.5 motor, which has stronger power and faster response speed.

It makes more easier flying with GoPro camera and allows you to perform some difficult action flying. You can even Freestyle with GEPRC Naked Hero 8 Camera. Therefore, the CineLog35 Performance can perfectly meet all requirements of aerial photography creators to reach higher-level quality shooting.

Of course, The analog version has also been greatly upgraded. Uses an amazing 1.6W high power RAD VTX, stable signal transmission, strong anti-interference ability, farther signal transmission distance.

The CineLog35 Performance is also equipped with excellent and affordable GEPRC ELRS 2.4G.

In short, we’ve made a lot of upgrades and optimizations for the CineLog35 Performance, which makes it easy for you to mount your GoPro camera for creative shooting work. The integrated propeller guard design with high flight safety allows indoors and outdoors flight.

This is a FPV quad that combines Cinematic shooting, Freestyle, Racing and Cruising to satisfy your indoor & outdoor flying requirements in various scenes.

We’ve been pursuing for lighter weight, better flying experience, and more functionality for all our products!

Check out our BNF Cinewhoop Collection, All our Analog BNF/PNP/RTFs and the rest of our GEPRC Products!

Note: Action Camera not included. This is the Analog Version.

Features

1. 3.5-inch integrated propeller guard, hollowed-out weight reduction and noise reduction design, quiet and safe flight,brand new appearance design
2.Equipped with GEPRC F722-45A AIO high-performance FC and integrated BLHeli_S 45A 6S ESC.
4.SPEEDX2 2105.5 motor with DT90-3 propeller, stable power output and smooth flight experience.
5.Reversed-motor design, higher flight efficiency, longer flight endurance, flexible flight attitude.
6.Comes with two 3D printed parts,which can be installed with GoPro cameras or Naked 8,10 Camera, Insta 360 GO2 and Caddx Peanut cameras.
7.Shock-absorbing gimbal design, more stable and clearer shooting, Without jelly any more.
8.The analog version uses RAD high power 1.6W VTX, stable signal transmission, strong anti-interference ability and longer signal transmission distance.
9.The GEPRC Team’s Splendid Tuning and the overall flight feel is delicate and flexible.

Specifications

Model: CineLog35 Performance Analog
Brand: GEPRC
Frame: GEP-CL35 Performance
Wheelbase:142mm
Top plate: 2.5mm
Bottom plate: 2.0mm
Arm plate: 3.5mm
FC system: GEP-F722-45A AIO
MCU: STM32F722
IMU: 6-Axis
OSD: BetaFlight OSD w/AT7456E chip
ESC: BLheli_S 45A
VTX: RAD 5.8G VTX 1.6W
Camera: Caddx Ratel2
Propeller: HQ DT90-3
Antenna: GEPRC Momoda 5.8g MMCX RHCP 195mm Long Version Antenna
Motor: SPEEDX2 2105.5-2650KV
Weight: 257.9g (CineLog35 Performance Analog 6S PNP)
Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS2.4G
Battery:LiPo 6S 850mAh-1550mAh

Cruising Flight Time

6S 1550MAH Battery: 5 minutes 30 seconds (with GoPro10 mounted)
6S 1550MAH Battery: 7 minutes 30 seconds (None)

Includes

1 x CineLog35 Performance Analog - Chosen Receiver
2 x HQ DT90-3 propellers (pair)
1 x Battery strap M15x200mm
2 x Battery silicone pads
2 x Landing pads
1 x Spare 3D printing parts
1 x Set of screws
1 x Set of screwdriver
1 x CADDX OSD menu board
1 x Antenna fixed tube
Note: Action Camera not included. This is the HD version with Caddx Nebula Pro camera.

GEPRC CineLog35 Performance Edition 3.5" 6S CineWhoop Analog FPV Drone - Choose Receiver