Available with or without DJI air unit, choose your option from the drop down menu.
This version of Transtec Beetle includes the updated flight controller thats binds to your DJI radio with no additional hardware needed.
You can also add your favorite receiver like Frsky,Spectrum or TBS Nano crossfire.
The TransTEC Beetle HOM is an ultra-lightweight frame designed for DJI FPV. Experience the world in FPV. Plug and play!
- Frame Size: 130mm
- FC: TransTEC F411 HD
- ESC: TransTEC 25A Blheli_S 4in1 3-5S
- Motor: TransTEC 1106 Freestyle
- Bottom Plate: 2.5mm High Quality Carbon Fiber
- LEDs: 9 RGB LED (Betaflight Programmable)
- Props: Gemfan 2540-3 (The prop color and model may vary)
- Antenna : Custom Linear Antenna (almost same performance with DJI antenna)
- Weight: 134g (w/o prop guards)
- Less than 200 gram take off weight!
- MCU : STM32F411
- IMU : MPU6000 Low noise with power filter
- Anti-Vibration silicone grommets built in
- 2x Uarts(1,2,4,5) with built-in SBUS inversion
- 4x Dshot/Proshot/Oneshot outputs(Support Bidshot)
- 1x JST-SH 1.0_8pin connector (G/Vbat/S1/S2/S3/S4/Current/R4) for Dji Vtx
- 1x GH_1.25_6pin connector for DJI HD Vtx
- WS2812 Led Strip support(5V output)
- Input : 6~20V (2~4S LiPo)
- BEC : 5V 2A cont. (Max.3A)
- LDO 3.3V : Max.200mA
- USB Type-C connector
- Input Voltage : 3-5S
- Max Current : 35A(10s)
- Continuous Current : 25A
- Connect pin : 6pin
- Mount hole : 20x20
- 1x Beetle HD
- 2x Replaced Canopy x2
- 4x Propller Guard
- 2x Propller Set
- 1x Battery Strap
- 1x Motor Screw Set for Guards
- 1x DJI Camera Protector TPU
Compatible with DJI Remote Controllers for the most seamless flying experience.