This is the new upgraded PRO version of the popular Diatone CUBE PNP that runs FlightOne's Falco-X software.
-The stack now has been replaced by a new Diatone AIO board.
-339 (3 inch) Variant now is available for 2S or 3S batteries
-3S version of the 339 now has a thicker 4mm main frame
please make sure to choose the correct variant from the drop down menu depending on what battery you will be using.
All variants use the same AIO board so technically they will be fine with any lipo range 2-4S.
We highly recommend the following combinations and batteries to insure the longevity of your ESC and motors.
GTB339 3S (Recommended GNB/Infinity 450-520mAh)
FlightOne Recommendations :
Recommened Battery/Prop Combination:
Bi-Blade props – 2s or 3s Battery
Tri-Blade props – 2s battery only
Do Not use 4s battery
Use of higher than recommended battery may cause ESC to burn.
After every crash, make sure motors are spinning freely before arming
Brand name: Diatone
Item name: DIATONE GTB 339 PRO AIO
Weight about ：46g -55g
MCU: MAMBA F411 NANO AIO
OSD: BF OSD
ESC Soft: Dshot300/600
Input: 2~4S Lipo (8.4~16.7V)
BEC: 5V 1.5A
Camera: RUNCAM NANO2 Camera
Antenna: Copper pipe antenna
VTX: TBS UNIFY PRO32 NANO
Motor: MAMBA Racing MB1103 1105
Lipo: 3S 300-450mah
CUBE 339 Bottom Thickness：4 mm 1105 5500KV 3S
INPUT VOLTAGE:2~4S Lipo (8.4~16.7V)
CONTINUE CURRENT: 13 A×4
BEC: NO SOFT: Dshot600
Target: MAMBA F411 （uploading.....） Download