Expertly designed with a STM32 F722 MCU running at an impressive 216MHz and an ICM42688P gyroscope, this flight controller features an independent, low-noise power supply. With multiple ports including ESC, Digital VTX, Analog VTX, Receiver, and LED, setup is made quick and easy. Other notable features include a built-in analog video OSD, 16 Mbytes black box, and a high power synchronous rectifier BEC, providing stable 9V/3A & 5V/2A output with up to 8S input support.

Check out all our 30x30mm Flight controllers, Stacks and our Complete collection of Holybro Products.

Features:

High-performance STM32 F722 MCU with speeds up to 216MHz.
ICM42688P gyroscope, independent low-noise power supply.
Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.
Built-in analog video OSD, 16 Mbytes black box,
High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.

Specifications:

MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash
IMU: ICM42688-P (SPI)
Barometer: BMP280
OSD: AT7456E
5x hardware UARTS (UART1,2,3,4,6)
7x PWM Outputs (6 Motor Output, 1 LED)
Onboard 16 Mbytes for Blackbox logging
Battery input voltage: 3S - 8S
BEC: 9V/3A, 5V/2A, 3.3V/0.2A
Connector
- 2x JST-SH 8pin port for ESC
- 1x JST-SH 6pin port for HD VTX
- 2x JST-SH 4pin port for Receiver & Analog Camera
- 1x JST-SH 3pin port for LED
USB Type -C
Dimensions: 35x35mm
Mounting Holes: Standard 30.5 x 30.5
Weight: 8g

Firmware Targets:

Betaflight Target: KAKUTEF7MINIV3
INAV Target: KAKUTEF7MINIV3

Download the User Manual and Pinout Here

Tekko32 F4 4in1 50A ESC:

Features:

New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Specifications:

Continuous Current: 50A x4
Burst Current: 60A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120 (V1.9 Version)
Dimensions: 48x37x6mm / Weight: 13.8g
Mounting holes: M4 30.5x30.5mm (M3 grommets included)

Package Includes:

1x Kakute F722
1x Tekko32 F4 4in1 50A ESC
1x Electrolytic capacito: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
1x JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)
1x JST SH 6pin 100mm cable(for Caddx HD Systems)

Holybro Kakute F722 W/Tekko32 F4 4in1 50A ESC STACK - 30x30mm