Product Details
Introduce the Bassline , inspired from Our team pilot Nathan Loopz
This idea was originally born in 2019, and today we make it into a BNF. Even though we have many excellent Micro Freestyle drones now days, the Bassline’s performance is still the craziest.
Check out our Micro Whoop Drones and our entire Happymodel Collection!
Features:
-
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
-
VTX Power up to 400mw
-
Support ELRS V3.0 (Need to upgrade firmware)
-
Powerful EX1103 KV11000 motors
-
CaddxFPV Ant FPV camera
-
Recommend 2S 350mah/450mah/550mah/650mah battery (Not include)
- Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm
FC Specifications:
- X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
- X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
- X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
- X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689 or ICM42688P(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
- Built-in voltage detection
- Built-in current sensor
4-in-1 ESC Specifications:
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Default Factory firmware: Z_H_30_REV16_7.HEX
- Default protocol: DSHOT300
- Support Bluejay firmware
ELRS SPI Receiver Specifications:
- 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Compatible with ExpressLRS V2.0 TX Module
- Couldn’t flash separately ExpressLRS firmware
- Could flash FC firmware to support ExpressLRS v3.0 TX module
FRSky SPI Receiver Specifications:
-
SPI BUS receiver Frsky D8/D16 compatible
-
Compatible Non EU transmitter D8/D16 modelChannels: 8ch/16ch
- No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Motor Specifications:
-
Mode: EX1103 KV11000
-
Configu-ration:9N12P
-
Stator Diamter:11mm
-
Stator Length:3mm
-
Shaft Diameter:Φ1.5mm
-
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
-
Weight(g):3.8g
- No.of Cells(Lipo):1-2S
Propeller Specifications:
- Weight:0.88g
- Material: PC
- Pitch:2.3inch
- Props Dia:52.17mm
- Center Thickness:5mm
- Center Hole Dia:1.5mm
Caddx ANT 1200TVL Camera Specifications:
-
Image Sensor: 1/3″ CMOS Sensor
-
Horizontal Resolution: 1200 TVL
-
TV System: NTSC or PAL
-
IMAGE: 16:9 or 4:3
-
Synchronization: Internal
-
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
-
S/N Ratio : >52dB (AGC OFF)
-
Video Output: CVBS
-
Lens: 1.8mm
-
Min. Illumination: 0.001Lux@F1.2
-
Auto Gain Control: YES
-
WDR: Global WDR
-
DNR: 3D DNR
-
Dimensions: 14*14mm(with bracket to 19*19mm)
-
Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
Onboard 5.8GHz OPENVTX Specifications:
- Firmware version: OPENVTX
- Smartaudio v2.1
- PIT Mode support
- RCE Mode support
- Channels:48ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
Package Includes:
- 1 x Happymodel Baseline 2S 2" Brushless Analog FPV Racing Drone - Chosen Receiver