Introducing HAKRC's new 60A 4-in-1 ESC for power hungry builds or just peace of mind knowing your ESC can handle any abuse you throw at it.

Check out all our 30x30MM Electronic Speed Controllers and the rest of our HAKRC Collection!

Features:

High quality hardware

STM32F051 main control chip, operating frequency up to 48MHz. Imported MOSFET from abroad, three-in-one IC driver, imported high-quality high-frequency ceramic capacitors. High-end PCB production process, the pads are all metallized and edged, so that you can avoid the pads from falling off when using; 3 ounces of copper thickness, 6-layer board, greatly reduce heat generation, higher efficiency.

Highly integrated and compact

It integrates 4 high-performance 60A ESCs, built-in galvanometers, and purchases new and advanced SMT. After such a high level of integration, the volume is only about the same size as the flight controller of the traverse aircraft, and the installation and wiring will become very simple. Such an incredible size and volume, tailored for a race-grade traverser.

Native support for BLHeli-32

Using the BLHeli-32 firmware, it has powerful performance and rich functions; and supports multiple ways to set ESC parameters, or upgrade the ESC firmware (such as through the throttle signal line, use other development boards, or use Cleanflight or Betaflight firmware to power the flight controller to set or upgrade).

Hardware PWM, Damped Light

The hardware PWM drives the motor, with less noise and smoother throttle response. Damped Light technology, regenerative braking function, makes the motor deceleration more sensitive and effective, and the control is more accurate; active freewheeling technology allows the battery to recover power and prolong the battery life.

DShot150/300/600/1200 Ready

Not only supports ordinary PWM throttle signal mode, Oneshot125, Oneshot42 and MultiShot ultra-high-speed throttle signals, but also supports the latest DShot150/300/600/1200 digital throttle, with strong anti-interference ability and fast response. The input and output lines use soft silicone wire, which is very durable and high temperature resistance, which is convenient for welding.

Specifications:

Input voltage: 2-6S
Continuous Current: 60A
Peak Current: 70A
ESC Protocol: DShot150/300/600/1200 PWM Oneshot125, Oneshot42, and MultiShot
Firmware: BLHeli_32
Firmware version: BL32.7
Mounting Hole Pattern : 30.5x30.5mm / M3
Product size: 45x42.5x6mm
Weight: 14.5g

Package Includes:

1 x HAKRC HK3260 60A BLheli_32 2-6S 4in1 ESC
1 x XT60 Connector
1 x 12AWG 6cm Power Cable
1 x 35V 470uF Capacitor
2 x 8Pin JST ESC to FC cable
4 x M3 Grommets

HAKRC HK3260 60A BLheli_32 2-6S 4in1 ESC - 30x30mm